News

featured Why 95A Prints First: TPU Filament Hardness for 3D Printers

Choose TPU filament hardness for 3D printing: why start with 95A, when to use 85A or 98A, plus slicer, hardware, and drying tips to make prints succeed.

On Sep 14, 2026 by SubliBlanks 0 comments

Laboratory testing polymer drinkware migration

Verify Lab Data Before Buying Polymer Drinkware for Trade Decorators

Evidence-first checklist for buyers and decorators: verify lab tests, read migration limits, and choose polymer drinkware safe for hot fills.

On Sep 13, 2026 by SubliBlanks 0 comments

Scale to 30 Coasters: Slate Engraving Settings for Makers

Production-focused how-to for makers and small shops: batch ready test-grid settings, alignment methods, and finishing steps to repeatably engrave slate...

On Sep 12, 2026 by SubliBlanks 0 comments

ABS test coupon during thermal inspection

Design for 70–80°C: ABS Filament Heat Limits, HDT vs Tg for Engineers

ABS filament heat resistance: why HDT (not Tg) sets the design limit, how annealing (110–130°C, 2–5 hrs) helps, and which checks to run before production.

On Sep 11, 2026 by SubliBlanks 0 comments

Operator checking a DTF printing workflow

4 RIP categories to replace AcroRIP for DTF shops

Find the right AcroRIP swap for your DTF shop. See four RIP categories, compatibility checks, licensing costs and a hands on test plan.

On Sep 10, 2026 by SubliBlanks 0 comments

Filament spool drying beside humidity control

Dry, Seal, Monitor: Filament Moisture Control at 10–20% RH for Makers

Stop wet filament wrecking prints. Use a material-first workflow: when to dry, safe temperatures, 10–20% RH storage, plus practical drying and monitoring...

On Sep 09, 2026 by SubliBlanks 0 comments

Steel-rule die over flat packaging board

Die Cut Mailer Boxes: Specify a Precision Fit, No Minimum Order

Specify die cut mailer boxes that fit: pick board and inserts, prepare supplier ready dielines, and order samples with no minimums.

On Sep 08, 2026 by SubliBlanks 0 comments

Trending Now

Sale Products

Trending Now

Sale Products

RECENT ARTICLES

Laser Ventilation Setup: Why 75 CFM May Fall Short

5 Step DTF White Ink Circulation Protocol for Shops with Pump Settings

Stop Reprints: RIP Color Management with ICC Profiling for Print Pros

No Minimum Orders for Date Stamp Bands, Trade Parts and Fit Advice

Start With 15×15: Heat Press Size for Small Shops, Plus Trade Checks

Blog Tags

featured Why 95A Prints First: TPU Filament Hardness for 3D Printers

Verify Lab Data Before Buying Polymer Drinkware for Trade Decorators

Scale to 30 Coasters: Slate Engraving Settings for Makers

Design for 70–80°C: ABS Filament Heat Limits, HDT vs Tg for Engineers

4 RIP categories to replace AcroRIP for DTF shops

Dry, Seal, Monitor: Filament Moisture Control at 10–20% RH for Makers

Die Cut Mailer Boxes: Specify a Precision Fit, No Minimum Order

Trending Now

Sale Products

Trending Now

Sale Products

Trending Now

Sale Products

Featured Product

P Series

S Series

M Series

F Series

Accessories

PLA+ 2.0

Silk PLA+

PETG

High Speed PETG

Dry & Cure Machines

News

RECENT ARTICLES

Blog Tags

Shop the look

Choose options

Terms & conditions

Choose options

Trending Now

Sale Products