News

featured Trade Tested: Engraving Acrylic Types and the 3–6mm Decision

Supplier-tested guidance on engraving acrylic types: when the 3–6mm band decides cast vs extruded, which laser to use, and a repeatable test checklist for...

On Sep 18, 2026 by SubliBlanks 0 comments

Stop Nozzle Clogs: Sublimation Ink Shelf Life for Small Shops

Practical, maintenance-first steps to extend sublimation ink shelf life. Learn when to discard, store at 15 to 25°C, and run quick maintenance prints to...

On Sep 17, 2026 by SubliBlanks 0 comments

6–8mm Cells Won’t Fix Warping: Laser Honeycomb Beds for Small Shops

Practical workshop guidance on laser honeycomb beds: when to use them, why frame rigidity matters more than cell size, plus DIY sizing and shipping cautions.

On Sep 16, 2026 by SubliBlanks 0 comments

Silicone wrap clamped around tumbler edge

Trade Ready Silicone Wraps for Tumblers: Test Runs, No Minimum Orders

Use silicone wraps on straight 20oz tumblers: start with a test run, fix clamp overlap, and source no minimum sample wraps and blanks.

On Sep 15, 2026 by SubliBlanks 0 comments

Why 95A Prints First: TPU Filament Hardness for 3D Printers

Choose TPU filament hardness for 3D printing: why start with 95A, when to use 85A or 98A, plus slicer, hardware, and drying tips to make prints succeed.

On Sep 14, 2026 by SubliBlanks 0 comments

Laboratory testing polymer drinkware migration

Verify Lab Data Before Buying Polymer Drinkware for Trade Decorators

Evidence-first checklist for buyers and decorators: verify lab tests, read migration limits, and choose polymer drinkware safe for hot fills.

On Sep 13, 2026 by SubliBlanks 0 comments

Scale to 30 Coasters: Slate Engraving Settings for Makers

Production-focused how-to for makers and small shops: batch ready test-grid settings, alignment methods, and finishing steps to repeatably engrave slate...

On Sep 12, 2026 by SubliBlanks 0 comments

Trending Now

Sale Products

Trending Now

Sale Products

RECENT ARTICLES

Trade Tested: Engraving Acrylic Types and the 3–6mm Decision

Stop Nozzle Clogs: Sublimation Ink Shelf Life for Small Shops

6–8mm Cells Won’t Fix Warping: Laser Honeycomb Beds for Small Shops

Trade Ready Silicone Wraps for Tumblers: Test Runs, No Minimum Orders

Why 95A Prints First: TPU Filament Hardness for 3D Printers

Blog Tags

featured Trade Tested: Engraving Acrylic Types and the 3–6mm Decision

Stop Nozzle Clogs: Sublimation Ink Shelf Life for Small Shops

6–8mm Cells Won’t Fix Warping: Laser Honeycomb Beds for Small Shops

Trade Ready Silicone Wraps for Tumblers: Test Runs, No Minimum Orders

Why 95A Prints First: TPU Filament Hardness for 3D Printers

Verify Lab Data Before Buying Polymer Drinkware for Trade Decorators

Scale to 30 Coasters: Slate Engraving Settings for Makers

Trending Now

Sale Products

Trending Now

Sale Products

Trending Now

Sale Products

Featured Product

P Series

S Series

M Series

F Series

Accessories

PLA+ 2.0

Silk PLA+

PETG

High Speed PETG

Dry & Cure Machines

News

RECENT ARTICLES

Blog Tags

Shop the look

Choose options

Terms & conditions

Choose options

Trending Now

Sale Products