Customer collections have been resumed, orders must be placed online before collecting. Please ring the bell and wait outside until a member of staff attends to you.

+44 (0) 1709 940011

enquiries@subliblanks.com

Mug Tooling And Clamps

SubliBlanks-01

Tooling for 11oz polymer mugs - pink

11oz Polymer - Printing Jig If you are planning on printing 11oz Polymer mugs you will need a puck to ensure that your item being sublimated does not deform. Printing polymer mugs without the jigs can cause the mug to deform when...
£16.00
SubliBlanks-01

10/11oz Green Mug Clamp

Green Mug Clamp Budget mug clamps suitable to use with 3D Vacuum presses and Ovens. Suitable for 10oz and 11oz Mugs Easy to use Material : Silicone / Metal Quantity :1 PCDimensions : Capable of printing 10 and 11 oz mugs
£6.85
SubliBlanks-01

10/11oz Dino Mug Press Pro V2 / V3 Heating Element

11oz Heating element for mug press V2 and V3A fantastic addition to the mug world! this element offers supreme quality. A very high quality blanket. with an average production reported at - 1000-3000 per heater.   - Capable of pressing...
£65.00
SubliBlanks-01

6oz Heating Element for Dino Mug press - V2 / V3

6oz Heating element for mug press V2 and V3A fantastic addition to the mug world! this element offers supreme quality. A very high quality blanket. with an average production reported at - 1000-3000 per heater.   - Capable of pressing 10...
£55.00
SubliBlanks-01

10oz Red Mug Clamp

10oz Red Mug Clamp Premium mug clamps suitable to use with 3D Vacuum presses and Ovens. Suitable for 10oz Mugs Easy to use Material : Silicone / Metal Quantity :1 PCDimensions : Capable of printing 10 oz mugs
£12.50
SubliBlanks-01

Tooling for kids water bottle - Blue

Kids water bottle - Printing Jig If you are planning on printing kids water bottles you will need a puck to ensure that your item being sublimated does not deform. Printing polymer mugs without the jigs can cause the water bottles to deform when heat...
£16.00
SubliBlanks-01

Tooling for 6oz polymer mugs - pink

6oz Polymer - Printing Jig If you are planning on printing 6oz Polymer mugs you will need a puck to ensure that your item being sublimated does not deform. Printing polymer mugs without the jigs can cause the mug to deform...
£16.00
SubliBlanks-01

12oz Latte Heating Element for Dino Mug press - V2 / V3

12oz Latte Heating element for mug press V2 and V3A fantastic addition to the mug world! this element offers supreme quality. A very high quality blanket. with an average production reported at - 1000-3000 per heater.   - Capable of pressing...
£60.00
SubliBlanks-01

Tooling for 14oz Travel mug - Blue

14oz Travel mug - Printing Jig If you are planning on printing 14oz travel mugs you will need a puck to ensure that your item being sublimated does not deform. Printing polymer mugs without the jigs can cause the water bottles to deform when...
£16.00
SubliBlanks-01

17oz Latte Heating Element for Dino Mug press - V2 / V3

17oz Latte Heating element for mug press V2 and V3A fantastic addition to the mug world! this element offers supreme quality. A very high quality blanket. with an average production reported at - 1000-3000 per heater.   - Capable of pressing...
£65.00